How To Fix Peloton Belt Noise – Complete Guide

Are you frustrated by the squeaky, grinding belt noise from your Peloton? You’re not alone.

Whether you are a beginner or an experienced cyclist, listening to that annoying sound can be very frustrating every time you take your bike out for a ride.

While fixing the problem is no easy feat, we are here to help! In this complete guide about how to fix Peloton belt noise, we will go over all of the possible solutions so that you can get back out there and enjoy riding without further interruption.

Let’s start with understanding why these noises occur before finding the right fix for each scenario.

How To Fix Peloton Belt Noise

How To Fix Peloton Belt Noise – Step By Step

Belt noise can be frustrating, distracting, and often a sign that something needs adjusting. However, with a bit of troubleshooting and minor adjustments, you can effectively eliminate this problem and get back to enjoying your workouts.

Step 1: Inspection

Start by inspecting the bike’s belt and pulley system carefully. Search for signs of wear and tear, such as frayed edges or other damage.

Make sure the belt is not too loose or too tight. Check the alignment of the pulley with the belt and the tension adjustment knob. All parts should be located correctly and free from damage.

Step 2: Adjusting Tension

If the belt appears to be in good condition, the next step is to adjust the tension. Locate the tension knob located on the bike’s resistance system.

Ensure the knob is turned clockwise to increase tension, which should help reduce any slippage causing noise. Do not over-tighten the belt, as this can cause additional problems.

Step 3: Lubrication

Lubrication can also help reduce noise. It can also help prolong the lifespan of your belt and other parts.

To lubricate the belt, apply a small amount of silicone-based lubricant to a clean cloth and gently apply it to the surface of the belt. Please avoid using any oil-based products as they can damage the belt.

Step 4: Professional Help

If the above steps do not improve the situation, it might be time to seek professional assistance. Contact Peloton support; a technician will help diagnose and fix the issue.

Can I fix the belt noise myself or do I need professional help?

When to Seek Professional Help?

If the belt noise persists even after trying your hand at some DIY fixes, it is recommended that you seek professional assistance.

Additionally, some common problems associated with the belt noise require a certified mechanic to rectify them. Thus, it is best to consult an experienced technician to help diagnose and fix the issue.

Common Problems That Require Professional Assistance

Some common problems associated with belt noise are the worn-out or damaged belt tensioner, misaligned pulleys, or a failing alternator.

These issues require a level of expertise and equipment that only a certified mechanic can provide.

Attempting to fix the problem on your own may worsen the issue and lead to higher repair costs.

Instructions for Fixing the Belt Noise

If you are well-versed in car repair, you can attempt some DIY fixes to eliminate the belt noise. First, inspect the belt for signs of wear and tear, such as fraying or cracking.

If you notice any signs of damage, replace the belt with a new one. Another fix you can try is using a belt dressing or lubricant to reduce the friction that causes the noise.

What to Do if the Noise Persists After DIY Fixes?

If the belt noise persists even after making DIY fixes, it is best to consult a certified mechanic as soon as possible.

The noise could be a sign of a more severe underlying issue, and ignoring it could lead to more significant damage and costly repairs.

How Long Does It Take to Fix the Belt Noise?

The length of time it takes to fix the belt noise depends on the underlying issue causing the noise.

If the problem is a simple fix, like replacing the belt, it can take an hour or less. However, suppose the issue is more complex, such as a malfunctioning alternator. In that case, it may take several hours to identify the issue and complete the necessary repairs.

What are the common causes of Peloton Belt Noise?

As a Peloton user, it is important to take note of the common causes of belt noise to ensure that your workout experience stays smooth and uninterrupted. Loose screws on the machine have been identified as one of the leading causes of belt noise.

A simple check and tightening of the screws can significantly reduce this noise. Worn-out bearings in the flywheel can also cause disturbing grinding noises, prompting the need for replacement.

In addition, issues with the frame alignment can cause belt noise as the belt rubs against the frame, creating an annoying screeching sound.

It is also possible that other parts of the Peloton bike may cause noise, such as the pedals and chains, or even the floor beneath causing vibrations.

However, it is recommended to check the aforementioned causes first before considering other parts of the machine.

Finally, belt tension can also cause problematic belt noise. It is crucial to maintain the correct tension level of the belt, as too loose or too tight a belt can trigger unwanted sounds.

Understanding and addressing these common causes of belt noise can enhance the overall workout experience and reduce unnecessary disruptions.

How to prevent belt noise on a Peloton bike?

We understand that belt noise can be a frustrating issue and it can disrupt your workout experience. Therefore, we have compiled some tips on how to prevent belt noise on your Peloton bike.

First and foremost, regular maintenance of your Peloton bike is crucial in preventing belt noise. It is recommended that you clean your bike and inspect it for any loose parts or screws that may be contributing to the noise.

The belt tension should also be checked and adjusted periodically to ensure a smooth and quiet ride.

In order to protect the belt from wear and tear, it is important to keep it lubricated. A silicon-based lubricant designed for bike belts can help reduce friction and noise. It is important to avoid using any oil-based lubricant as it may cause damage to the belt.

One common mistake that can lead to belt noise is over-tightening the belt. It is important to follow the manufacturer’s recommendations for belt tension. Over-tightening the belt can cause excess friction and lead to premature wear and tear, resulting in noise.

Lastly, ensuring a proper fit of the belt is crucial to preventing belt noise. A loose or improperly fitted belt can cause a slapping noise while riding, distracting and disruptive. Refer to the manufacturer’s instructions for proper belt fitting and tension.

Why Does My Peloton Creak When I Pedal?

If you’ve experienced a creaking noise when pedaling on your Peloton, don’t worry, you’re not alone.

Fortunately, there are several possible causes for this annoying sound, and many of them can be resolved with minimal effort.

One reason for the creaking could be related to an issue with the pedals themselves. Often, the pedals on exercise equipment need to be tightened periodically to prevent them from loosening and causing unwanted noise.

Another possibility is that the crank arm is loose or needs lubrication. Without proper lubrication, the pedal spindle can become dry and create a creaking sound.

It’s also important to note that a pedaling creaking noise may stem from an inappropriate bike fit. If your bike isn’t set up correctly, you may use the wrong muscles or put pressure on areas of your body that are not accustomed to it. As a result, you may notice creaking noises and discomfort.

Lastly, it’s worth checking the chain to ensure it’s properly lubricated and adjusted. Without proper tension, the chain can vibrate and create noise. Similarly, worn bearings or other mechanical issues may also contribute to pedal creaking.

Why Is My Peloton Making A Scraping Noise?

One common reason why your Peloton might be making a scraping noise is due to a loose or misaligned belt. If the belt is not properly tensioned or has shifted from its original position, it can rub against the frame or other components, resulting in a scraping sound.

Another possible culprit could be a damaged pulley or bearings, which can cause the belt to scrape against other bike parts.

Additionally, it’s important to check the condition of your bike’s pedals and cleats. If there is debris or damage on the pedal or cleat, it can cause scraping sounds as they repeatedly make contact.

Something may also be caught in the chain or sprocket, which can cause a scraping or grinding noise as the chain attempts to rotate.


If you are hearing unusual noises from your Peloton machine’s belt, it is not clear whether it is due to a user error or a piece of faulty equipment.

To resolve this issue, it is recommended to contact the customer service team and report the problem.

Peloton will work on fixing the issue as soon as possible. We advise refraining from using the belt until it has been repaired.